wwxl Tile Floors August 15th, 2018 - 15:44:53
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
What`s the property owner`s risk tolerance? Does he/she want to be rock solid sure of the stability of the floor? Even if that means spending extra money and/or time to reinforce the floor. and accepting a floor that may sit higher than surrounding floors? Or is some risk of failure acceptable if the floor is not built to the righteous standards of the TCNA? Sometimes the extra effort is not worth the cost to the property owner. who should be fully informed on all options. Contractors who install flooring shouldn`t assume that clients don`t care enough to solve the problem: in the last year we`ve had two clients who spend thousands of extra dollars to reinforce subfloors in a kitchen and laundry room when we explained that their floors were too unstable for tile. They really wanted tile. and were willing to make the subfloor ready for it. even if it cost more.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.
Install the Ceramic Tiles. Start with the center and move outwards with each ceramic tile. Use thin set mortar or tile adhesive to set the tiles. make sure that the bond between the tile and the sub-floor sets by applying pressure on each tile. After the tiles have set. complete the process by applying the grout. Remember that the grout must be of the same color as the tiles you have chosen. Remember that each step requires twenty-four hours to set and dry before allowing yourself to proceed to the next step of your ceramic tile flooring installation.